Type the keyword and hit enter

Close
Wishlist
0

How to Clean the adidas Yeezy 350 Boost V2 ‘Static’

By : Team Crep Protect 0 Comments
10 Jan

If you’ve been having a tough time cleaning Yeezys, the guide below should give you some tips as well as a step by step process to ensure that you get the best results each time.


For our latest extreme clean video, we took on a sneaker that many of you have been asking to see; the adidas Yeezy 350 Boost V2 ‘Static.’ Since dropping in December 2018, the adidas Yeezy 350 ‘Static’ has gone on to be one of the most popular Yeezy sneakers; blending together a distinct Primeknit upper with the same familiar adidas Boost sole. 

We sent Professor Shaz to carry out field research and put these Static Yeezys through a pretty gruelling time. You can watch what happened to these Yeezys in the video below as well as a demonstration on how to clean Yeezy 350s.

 

 

After leaving these Yeezy 350s for 24 hours, the results were pretty crazy. What once was a pair of box-fresh white Yeezys now looks like something out of a bad dream, with mud across the entire upper, sole and laces. Whilst it may seem that all hope is gone, you will see why the Crep Protect Ultimate Sneaker Cleaner solution is the best shoe cleaner for Yeezys out there.

Step One – Remove the Laces

To get the best results, and to make sure that all the dirt is gone, remove the Yeezy Boost laces from the shoe. Yeezy 350 laces are not like traditional flat laces, they are a much thicker rope style meaning that dirt can get into the material more. Take the laces out first and set them aside for cleaning later.

Step Two – Brushing Off Excess Dirt

Once you’ve opened you Cure: Ultimate Sneaker Cleaner pack, take the all-purpose brush and being to remove all the excess dirt. As you can see from the video, there was quite a lot of dirt that had solidified after the 24 hour drying off period. Make sure that you get as much of the dry dirt off as possible before you start to apply the Cure. This will make the process of cleaning sneakers much easier for you.

If you’ve been wondering how to clean Yeezy Boost 350s as well as Professor Shaz, the technique provided below will help you to get the best results when cleaning sneakers by hand.

Step Three – Get Your Cure Set Up

Knowing how to clean Yeezy 350s is a valuable tool for any sneakerhead. Now the excess dirt has been brushed off the sneaker you can begin to start the cleaning process. 

Place warm water into a bowl and dip the brush bristles into the water for a few seconds. Take the Cure Solution and apply a few drops across the brush, making sure that the solution is spread out evenly. 

Step Four – Starting the Clean

People often want to know how to wash Yeezys as it is seen as an easier option. However, if you do put your Yeezys in a washing machine, this could have damaging effects on the upper and the sole. Water can get between the glue that holds the upper and midsole together. The best way to clean Yeezys is by hand!

If you ever wanted to know how to clean adidas Primeknit, we’ll teach you with the following steps below. Before you ask “does Crep Protect work on Primeknit?” rest assured, it does. Cleaning Primeknit can be a tough task but thanks to our solution it is much simpler. 

Take the brush and begin to make circular motions on the Primeknit, making sure that you push the dirt down away from the upper. Remember, the best way to clean adidas Yeezy 350 Boost V2s is to focus on one section at a time. 

We have focussed on the toe box of this adidas Yeezy 350 Boost ‘Static’ and then started to make our way around the entire sneaker in a clockwise rotation. By tackling the shoe section by section you ensure that you focus on getting the best results.

You will see that the foam has started to appear, this is what to look out for. The foam will bring the dirt out of the sneaker and shows that you are putting in the effort to get all the dirt out of your Yeezys!

If you feel that the foam is starting to fade then add more solution. It’s important to remember not to add too much of the solution as it is quite concentrated. A few drops will ensure that you have enough to clean your Yeezy Boost 350s.

Ensure that the brush is wet throughout the cleaning process. You need to keep placing the brush in the water as this is where the dirt ends up.

Remove the foam using the Crep Protect Microfibre Cloth and then make your way to the sole.

Step Five – Cleaning the Sole

Cleaning adidas Boost can be difficult. Thankfully, we have the ultimate Yeezy cleaning kit to help you.

After you have cleaned the upper, ensuring that you push all the dirt away from the sneaker, you can now start to clean the Yeezy 350 Boost bottom. This can be one of the trickier parts to get right so we’ll show you just how to clean the Boost material properly.

Dip your brush into the warm water and apply some more Cure Solution. Starting with the midsole, you can start to scrub the dirt away. Don’t be afraid to brush the midsole with a bit more elbow grease as it is not as sensitive as the Primeknit material.

Starting from the toe box, make your way around the midsole in a clockwise direction ensuring that all the dirt has been scrubbed off, before turning the sneaker over to the sole.

We often get asked how to clean Boost material without damaging it. Thankfully, when cleaning Boost, you will see that it is not sensitive as everybody thinks so you can really scrub away all of the dirt on the top. The adidas Yeezy Boost 350 is durable so you can go over the sneaker without harming the sole.

Remove the excess foam from the sole and then repeat the process again. 

Step Six – Working Your Way Around the Upper Again

Depending on how dirty your Yeezys are, you may need to work your way around again. As you can see from the video above, we got this adidas Yeezy Boost extremely dirty so we can’t just give it a once over.

As we already mentioned, the best way to clean your adidas Yeezy 350 Boost is to start off section by section and work your way around the sneaker in a clockwise fashion, making sure you cover as much of the Primeknit as possible. If you know how to clean Yeezys, then you will also know how to clean Ultra Boosts as they both use the same Primeknit material!

Once you feel that the upper is clean, you can now work your way to the sole and repeat the process. The bottom of Yeezys can be a tough area to tackle because of the lines throughout the sole. By going over the shoe twice, you are ensuring that there is no excess dirt left on the sneaker. This will make your shoes look brand new, which is why this method is the best way to clean adidas Yeezy 350 Boosts.

Knowing how to clean the Yeezy 350 Boost with our method will make sure that your pair comes out looking fresh again. Now you know how to clean stained shoes, you can test this technique out on all Yeezys!

Step Seven – Cleaning the Laces

Now you’ve cleaned the shoe, we can get back to cleaning the laces. The best way to clean the laces is by soaking them in the Crep Protect Cure Solution for a few minutes, draining all the dirt and liquid off and then repeating the process. By doing this, you are pulling the dirt of the material and draining the excess liquid off. Do this a few times and the laces will be looking brand new!

Step Eight – Leaving the Shoe to Dry

As most sneakerheads will know, it’s important to let the sneaker dry off. Store the sneakers in a cool, dry place and leave them for a minimum of twelve hours. and then take a look at the results.

Step Nine – All Done!

After all the hard work, you can now take a look at the results. As we said, Professor Shaz is one of the best sneaker cleaners we know and with his trusty Crep Protect Cure Kit, he tackled a sneaker that many would have thought was past the point of return.

Recap

Let’s take a recap of how to clean Yeezys!

  • Step One – Remove the laces and set aside for later
  • Step Two – Brush off the excess dirt with the Crep Protect brush, ensuring as much dirt is off as possible
  • Step Three – Wet the brush and apply the Crep Protect Cure Solution sparingly, just a few drops will do
  • Step Four – Start brushing in a circular motion from the toe box, pushing the dirt towards the sole and moving in a clockwise direction
  • Step Five – Wipe the upper down and make your way to the sole, being firmer with the brush when cleaning the midsole and Boost sole
  • Step Six – Repeat the process depending on how dirty your Yeezys are until you are happy
  • Step Seven – Soak the laces for a few minutes, drain off all dirt and water and repeat
  • Step Eight – Leave the shoe to dry for a minimum of 12 hours
  • Step Nine – Wear them again!

Conclusion

If you want to know how to clean your Yeezys, how to clean Boost foam or just how to clean your shoes, make sure that you keep a lookout for more of our upcoming cleaning guides. We’ll be showing you how to clean your sneakers at home, providing you with our expertise to make sure you get the best results every time.

If you do think that your sneakers need a professional clean then head to the Crep Protect Sneaker Services section at the new adidas_LDN store on Oxford Street, London. Our Sneaker Technicians can offer a premium cleaning service that will have your shoes looking brand new again. You can even pick up a Crep Protect x adidas Cleaning kit that will explain how to clean adidas shoes as professionally as we do.

Categories: Cleaning, Products
Close